Smart Home Indoor Camera

The Smart Home Indoor IP Camera is a wireless IP camera with night vision.

Provides live and recorded 1080P video to web-enabled computers, cell phones and mobile devices 

One camera is included in the Control & Premium Package; customers can purchase up to 3 additional cameras

Available in Washington only
 

• Features
   
  • Sleek, compact design with high performance image quality
     
  • Maximum storage of 1,000 videos in online account per month
     
  • May delete videos to free up space when needed
     
  • Supports two way audio (not available on all devices)
     
  • Video clips can be set from 5 seconds to 50 seconds
     

Indoor IP Camera Specifications

• Model: ADC-V522IR
  
  
• Lens: 2.8mm, F1.85
  
  
• Angle of View: 113°
  
  
• Resolution: 1920x1080 max
  
  
• Recording Compression: MPEG-4, H.264
  
  
• Image Sensor: 1/2.9" CMOS 2.12 MP
  
  
• Low-light sensitivity: 0 lux with IR (night vision)
  
  
• IR Range: Up to 15 feet
  I
• Image Adjustments: flip, brightness, contrast, saturation, sharpness
  
  
• Video Motion Detection: 3 windows, adjustable sensitivity and threshold
  
  
• Wireless Connectivity: 802.11 B/G/N/AC, 2.4 & 5 Ghz
  
  
• Ethernet connection: 10/100 Mbps RJ-45
  
  
• Simultaneous Viewers: 10
  
  
• Operating Temperature: 32°F - 104°F (0°C - 40°C)
  
  
• Operating Humidity: 20% - 80% (non-condensing) RH
  
  
• Dimensions: 2.75" x 2.06" x 3.67"
  
  
• Power: 12 V DC, 5 W
  
  

Lights and LED Guide

• Install
  
     LED Status                                                   Description
     
       All Off                                                            Power Off
     
       Solid Red                                                       Power On; system booting
  
       Green blink every second                                 Local network connection with local IP address
  
       Solid green                                                     Full internet connection with Alarm.com IP
  
       Blinking blue                                                   WPS connection in progress
  
       Blinking white                                                 WiFi access point mode
  
  
  
• Trouble
  
    Solid Red                                                       No local or internet connection 
  
  
  
• Factory Reset                                                 
  
  Red blink every 0.15 second and                         Restoring factory default settings     
   green blink every 0.15 second                            Press and hold the WPS button on back of camera
  
                                                                        Hold until LED is flashes green and red (about 15 seconds)
  
                                                                        The camera reboots to factory default
  
                                                                        If camera was previously added to an Alarm.com account,
                                                                        It must be deleted before it can be installed again