Wave Knowledge Center Customer Support Contact Us

Resolution Steps

Passport (Scientific Atlanta, Cisco Boxes)

    1. Press the Menu key twice while watching TV to reach the General Settings page

    2. Scroll down to Accessories

    3. Choose Set-Top Clock

    4. Choose Display and change the converter display to the following:

      • Show Time Always: only the clock displays

      • Show Channel Always: only current channel number displays

      • Show channel when Tuning: all other times the clock displays

    5. After selecting the Display, choose Illumination from the Set-Top Clock options

      • Always On: Clock will display even if converter is powered off

      • On/Off With Settop: Clock will display when converter is powered on, turn off when converter is powered off

    6. Press Exit on your remote

i-Guide (Motorola, Pace, Arris boxes)

    1. Press Menu twice for the TV Guide Main Menu

    2. Select Setup (usually on second screen)

    3. Select Cable Box Setup

    4. Under Front LED display, choose one of the following:

      • Current Channel - Displays the currently tuned channel on the front of the cable box

      • Current Time - Displays the current time on the cable box

Additional Information
Commercial Agent Steps
Financial Agent Steps
Management Steps
Enter your email address to receive a notification when the article is updated
Email Address

Was this article helpful?
Thank you for your feedback