866-WAVE-123

Wave Knowledge Center Customer Support Contact Us


Introduction
New Page 2

The Smart Home Indoor IP Camera is a wireless IP camera with night vision.

Provides live and recorded 1080P video to web-enabled computers, cell phones and mobile devices 

One camera is included in the Control & Premium Package; customers can purchase up to 3 additional cameras

Available in Washington only

  • Features

    • Sleek, compact design with high performance image quality

    • Maximum storage of 1,000 videos in online account per month

    • May delete videos to free up space when needed

    • Supports two way audio (not available on all devices)

    • Video clips can be set from 5 seconds to 50 seconds

Resolution Steps




Indoor IP Camera Specifications


    • Model: ADC-V522IR

    • Lens: 2.8mm, F1.85

    • Angle of View: 113°

    • Resolution: 1920x1080 max

    • Recording Compression: MPEG-4, H.264

    • Image Sensor: 1/2.9" CMOS 2.12 MP

    • Low-light sensitivity: 0 lux with IR (night vision)

    • IR Range: Up to 15 feet
      I
    • Image Adjustments: flip, brightness, contrast, saturation, sharpness

    • Video Motion Detection: 3 windows, adjustable sensitivity and threshold

    • Wireless Connectivity: 802.11 B/G/N/AC, 2.4 & 5 Ghz

    • Ethernet connection: 10/100 Mbps RJ-45

    • Simultaneous Viewers: 10

    • Operating Temperature: 32°F - 104°F (0°C - 40°C)

    • Operating Humidity: 20% - 80% (non-condensing) RH

    • Dimensions: 2.75" x 2.06" x 3.67"

    • Power: 12 V DC, 5 W

 

Lights and LED Guide


    • Install

         LED Status                                                   Description
         
           All Off                                                            Power Off
         
           Solid Red                                                       Power On; system booting

           Green blink every second                                 Local network connection with local IP address

           Solid green                                                     Full internet connection with Alarm.com IP

           Blinking blue                                                   WPS connection in progress

           Blinking white                                                 WiFi access point mode


    • Trouble

        Solid Red                                                       No local or internet connection 



    • Factory Reset                                                 

      Red blink every 0.15 second and                         Restoring factory default settings     
       green blink every 0.15 second                            Press and hold the WPS button on back of camera

                                                                            Hold until LED is flashes green and red (about 15 seconds)

                                                                            The camera reboots to factory default

                                                                            If camera was previously added to an Alarm.com account,
                                                                            It must be deleted before it can be installed again   

 

Additional Information
Commercial Agent Steps
Financial Agent Steps
Management Steps
Share
Subscribe
Enter your email address to receive a notification when the article is updated
Email Address
Subscribe
Unsubscribe
Share
To
Subject
Message
Send

Was this article helpful?
Thank you for your feedback