866-WAVE-123

Wave Knowledge Center Customer Support Contact Us


Introduction

Resolution Steps
 
  1. On a hard-wired (Ethernet) computer, open a web browser and type the address for the device in the address bar:

    Archer C7 AC1750 192.168.0.1 
    Arris DG860 192.168.0.1
    Arris DG1670    192.168.0.1
    Arris DG2460 192.168.0.1
    Arris DG2470 192.168.0.1
    Arris DG3450 192.168.0.1
    Asus RT Series 192.168.1.1
    Calix 854G Indoor ONT 192.168.1.1
    Calix 844E-1 Wireless Router 192.168.1.1
    eero app only 
    Hitron CGN Wireless Cable Gateway 192.168.0.1
    Hitron CGN3 Wireless Cable Gateway 192.168.0.1
    Hitron Coda 3582 192.168.0.1
    Hitron Coda 3589 192.168.0.1
    Hitron Coda 4589  192.168.0.1
    Linksys BEFCMU4 All-in-One 192.168.0.1
    Linksys WRT54G2/e1000/e1200 Router 192.168.1.1
    Linksys e2500 Router/ea2700/ea2750 Router/ea6350 Router 192.168.1.1
    Motorola SBG Series  192.168.1.1
    Netgear R7000 Nighthawk Router 192.168.1.1
    Pace D5001 All-in-one 192.168.0.1
    Technicolor CGM 4231 192.168.0.1
    Ubee All-in-One 192.168.0.1
    Ubee 1301 192.168.100.1


  2. Hit Enter

  3. You are prompted for a username and password.   Below you will find the username/password for each device

    Archer C7 AC1750 admin/admin 
    Arris DG860 admin/password
    Arris DG1670 admin/password
    Arris DG2460 admin/password
    Arris DG2470 admin/password
    Arris DG3450 admin/password
    Asus RT Series printed on device label
    Calix 854G Indoor ONT printed on device label
    Calix 844E-1 Wireless Router printed on device label
    eero app only 
    Hitron CGN Wireless Cable Gateway cusadmin/password
    Hitron CGN3 Wireless Cable Gateway cusadmin/password
    Hitron Coda 3582 cusadmin/password 
    Hitron Coda 3589 cusadmin/password 
    Hitron Coda 4589 cusadmin/password
    Linksys BEFCMU4 All-in-One <blank>/admin
    Linksys WRT54G2/e1000/e1200 Router admin/admin
    Linksys e2500 Router/ea2750 Router/ea6350 Router <blank>/admin
    Linksys ea2700 admin/admin
    Motorola SBG Series admin/motorola 
    Netgear R7000 Nighthawk Router admin/password
    Pace D5001 All-in-one printed on device label
    Technicolor CGM 4231 <blank>/<blank>
    Ubee All-in-One user/user
    Ubee 1301 printed on device label

  4. Click OK

  5. Click on Wireless

  6. In the Service Set Identifier (SSID) box, place a name or number that will most easily be remembered and recognized. 

    • These could be names such as Dads Internet or Tiffanys Network

  7. A WPA2 Password Field appears in this same section, populate an appropriate password.

  8. If a New Channel drop-down box is present, select auto

  9. Click Apply
 
Additional Information
Commercial Agent Steps
Financial Agent Steps
Management Steps
Share
Subscribe
Enter your email address to receive a notification when the article is updated
Email Address
Subscribe
Unsubscribe
Share
To
Subject
Message
Send

Was this article helpful?
Thank you for your feedback